DHW AND SURPLUS FUNCTION

Owned by Marco Serpelloni
Last updated: Sept 25, 2023
1 min read

If, in Configuration 1, a digital contact (real or virtual) has been assigned to the Surplus Channel:

Within the DHW page, it is necessary to assign a priority chosen from the following:

  • HIGH

  • MEDIUM

  • LOW

When the Surplus contact is active according to the assigned priority, the DHW subsystem is promoted from Economy to Comfort. 

Note

It is taken for granted that if you use this function, you should set a satisfactory Economy set point as the Comfort set point will only be used when the photovoltaic is producing and that under “normal” conditions the DHW should only work in Economy and Comfort when there is production or surplus from the photovoltaic. 

 For a detailed description of the Surplus Function in its entirely, click on SURPLUS FUNCTION.