REMOTE CONTROL

If a REG-LAN-MK2 or a REG-GSM is connected to a REG-DIN-8 in order to connect it to the remote management web server, it is necessary to enter the System Code Identification (ID) present on the sheet that you find in the product box:

Open

Open

For more information on remote management, see the Remote-Control_REG-System_Manual_r01.00 and its annex.

Warning

Do not change:

• PIN Unlocking Code

• Modbus Address

• Synoptic Configuration

If a REG-DOT-B is connected via WiFi, there is no need to set anything in this section!

If there is a REG-DOT-B and a REG-LAN-MK2 or a REG-GSM on the same system, set the WiFi Modem of the REG-DOT-B to OFF (from Home Page go to Settings – WiFi Connection – Advanced Settings – Modem Management):