If a REG-LAN-MK2 or a REG-GSM is connected to a REG-DIN-8 in order to connect it to the remote management web server, it is necessary to enter the System Identification Code found on the sheet that you find in the product box:
PHOTO TBD
For more information on remote management, see the Manuale_Telegestione_Sistemi-REG_r01.00 and its annex.
Warning
Do not change:
PIN Unlock Code
Modbus Address
Synoptic Configuration
If a REG-DOT-B is connected via WiFi, there is no need to set anything in this section!
If there is a REG-DOT-B and a REG-LAN-MK2 or a REG-GSM on the same system, set the WiFi Modem of the REG-DOT-B to OFF (from Home Page go to Settings – WiFi Connection – Advanced Settings – Modem Management):
