It is possible to “link” certain zones together, so that settings made on one zone are automatically transferred to another.
...
To link one zone to another, enter the Configuration Zone/2 sub page:PHOTO TBD
...
And select from the zone you want to connect T, M, and/o H and then choose which zone you want to link from the drop down menu on the right.
...
Zone 1 (master) is set with Winter Comfort Set at 21° and Winter Economy Set at 19°
Zone 2 (slave) is linked to the zone 1 and is set with Winter Comfort Set at 2° 1° (two degreesone degree) and Winter Economy Set at 1° 0,5°C (one half degree)
In this case, when the zone 2 (slave) is in Winter Comfort mode, its actual set point will be 23° 22° (that is 21° set on the mater zone plus the two one set on the slave zone), while in Winter Economy mode the actual set point will be 20° 19,5° (19°+10,5°).
The same applies to summer set points; moreover, consider that offset values can also be negative.PHOTO TBD
...
Example of Connected Zones: mixed technology systems
...