If a REG-LAN-MK2 or a REG-GSM is connected to a REG-DIN-8 in order to connect it to the remote management web server, it is necessary to enter the System Identification Code found Code Identification (ID) present on the sheet that you find in the product box:
PHOTO TBD
...
For more information on remote management, see the Manuale_Telegestione_Sistemi-REGRemote-Control_REG-System_Manual_r01.00 and its annex.
Warning
Do not change:
PIN Unlock Unlocking Code
Modbus Address
Synoptic Configuration
If a REG-DOT-B is connected via WiFi, there is no need to set anything in this section!
...