Circuit management subsystems (sometimes referred to as “manifolds”) allow you to control the pumps and, when required, the mixing valves of the systems. The system can manage up to 8 Circuits, which can be activated by:
...
It is possible to limit the outlet temperature between tMin and tMax and decide to which outdoor temperature (tOff) the system should switch off.
...
KDM: it is like KD, but tMin and tMax values are acquired from boilers of a specific manufacturer (do not use)
From Zone x: TBD
From Source x: TBD
From outlet probe: TBD
From inlet probe: to be used when installing the REG-010AD product (see REG-010AD manual)
From DHW Set Point: the set point used comes from the one set and actual in the DHW subsystem (see DHW SET POINT)
Warning
The set point may be changed if AMBIENT COMPENSATIONis used.