DISPLAY TOUCH SCREEN
...
All displays always come out as display 1; however, it is possible to set them up as display 2: to see how, follow the instructions on the respective data sheet. It is always possible, once the display is switched to display 2, to switch it back to display 1.
Warning
If two displays are connected to the same REG and they are both display 1 or display 2, neither of them will communicate. If the displays are enabled on the REG-DIN-8 but not connected, the bus error TFT 1 and/or TFT 2 in Configuration 1 and the Error bus led on the REG-DIN-8 will light up (steady yellow).
...