This section shows valid values only if connecting via USB cable directly to the REG-DOT-B, if connecting to the REG-DIN-8 do not use it:
...
It is possible to switch the WiFi Modem on or off within the DOT with the following commands to be entered in Modem RequestDemand, while in the first box of the Current Status you can see the status of the modem at that moment. If the request is equal to the status, it means that the modem has received the command:
...
If it is necessary for the router to also assign the DNS, then set DHCP = 2. If, on the other hand, you wish to manually enter the network parameters, then set DHCP to zero.
Warning
Every time the network parameters are changed, you need to set the DOT’s WiFi to OFF and then switch it on again.
...
The network SSID is the name of the WiFi network you wish to connect to and its password.
Warning
Do not leave spaces before or after the network name or password!
...