The annual calendar can be ON or OFF and can be enabled or disabled from the Configuration/1 Page:
...
When the calendar is active, it contributes, together with other factors (see SYSTEM ACTIVATION AND SEASONAL CHANGE), to the activation of the system and the determination of Current Season.
Note
The menu is only visible if the Annual Calendar function has been activated by ticking Schedule Enable.
...
The start date of the period: starting from the specified date, the next 2 parameters are activated, until the next date is reached.
Heating/Cooling system status: it can take on the following values:
OFF, the system is OFF;
WIN, the heating mode is ON; the Current Season is set to Winter
SUM, the cooling is ON; the Current Season is set to Summer
AUTO, the system is ON; the Current Season is automatically determined based on the outdoor temperature (OUTDOOR TEMPERATURE) or by an outdoor signal (EXTERNAL SIGNALS).
Domestic Hot Water production status; it can take on the following values:
OFF, the DHW production is OFF
ON, the DHW production is ON
Warning
DHW also has its own external signal enable command (see DHW SET POINT)
Note
The mode set on a certain date is maintained until the next date, chronologically, in the calendar. If the system is not online and therefore DOES NOT receive a date and time from the server, this must be set manually in DATE AND TIME SETTINGS.